Default Project

I don't use PSPad projects much but I was wondering if there was a way to set a default project so that when PSPad was started, that project would appear instead of an empty project.

There is no "Default" project, but PSPad remembers last used project and will open it next time when you start it.
Condition - program settings / Files - Save Work / Desktop set to any state except Don't restore files

This feature does not seem to work? I have two projects ("A" with loads of files, "B" with a few), regardless of which project I have open when I exit, PSPad always opens project "A".

My "save work/desktop" option is set to "PSPad opened files only".

Please advise

K

Ensure you have write rights to file Recent.ini.
Last open files and last open project are stored in Recent.ini file in [SaveWork] section

I have write access, but no [savework] section?

[Find files config]
Search where=2
Search directory=c:\duk6
Subdirectories=1
Clear results=1
File masks=*.for
Search text=bht
Replace text=
Ask replace=0
Case sensitive=0
Whole words=0
CodePage=0

[Find/Replace config]
Case sensitive=0
Whole words=0
Ask replace=0
Add LineNum=0
Entire Scope=1
RegExp=0

[Color Selector]
shStore1=15790320
shStore2=15790320
shStore3=15790320
shStore4=15790320
shStore5=15790320
shStore6=15790320
shStore7=15790320
shStore8=15790320

[Clip Window]
Height=165
Width=344

[Find files find history]
Item0=bht
Item1=programme path
Item2=lq_Depths
Item3=Q_ClassEntries
Item4=iactemp
Item5=qqrad
Item6=2100
Item7=M_FLD+IRT*3-2
Item8=Q_ClassShow
Item9=io_archive
Item10=archive
Item11=enablelog
Item12=real function
Item13=recall
Item14=F4

[Find files directories]
Item0=c:\duk6
Item1=c:\wlib
Item2=c:\duk6;c:\wlib

[Find files masks]
Item0=*.for

[CommandLine]
Item0=c:\win32app\salford\ftn95 %file%
Item1=\wlib\wlib.bat
Item2=\rep5\wlib.bat
Item3=\duk6\duk6\wlib.bat
Item4=wlib
Item5=c:\win32app\salford\ftn95 %file
Item6=c:\win32app\salford\ftn95 %1
Item7=c:\win32app\salford\ftn95 &f
Item8=c:\win32app\salford\ftn95 %%1
Item9=ftn95

[Recent Projects]
Item0=c:\senergy\LogicomEP.ppr
Item1=C:\senergy\Senergy.ppr
Item2=C:\duk6\Duk6\LogicomEP.ppr
Item3=C:\Users\kenny\Documents\Logic.ppr

[Find/Replace find history]
Item0=NMR_ENV
Item1=LQ_MAIN
Item2=nmr_lq
Item3=date
Item4=LSTOP
Item5=IO_ChStatsW
Item6=WF_PPlot
Item7=pistr
Item8=wcap
Item9=dsp
Item10=dsp%
Item11=936
Item12=70
Item13=dsp%d
Item14=acq%wfc

[Find/Replace replace history]
Item0=IPI_GetI8
Item1=IPD_
Item2=E IPD_
Item3=E IPL_
Item4=long
Item5=long
Item6=0
Item7=,
Item8=IP_ICurve_GetIndex1
Item9=C:\Logicdata\Thelma_i-files
Item10=I8CO
Item11=CBUFFI(
Item12=UU_WKOUT
Item13=UU_X
Item14=STR1

[Recent]
Item0=C:\duk6\modules\AN_MOD.FOR
Item1=C:\wlib\BDSCCOM.INC
Item2=C:\duk6\Duk6\cm_main.for
Item3=C:\duk6\decode\dec_dlis.for
Item4=C:\duk6\decode\DEC_MAIN.FOR
Item5=C:\duk6\decode\dec_qdl.for
Item6=C:\duk6\decode\DEC_QDS.FOR
Item7=C:\wlib\NWLIB.FOR
Item8=C:\senergy\Senergy_dummy.for
Item9=C:\senergy\senergy_main.for
Item10=C:\senergy\Senergy_Wrappers.for
Item11=C:\senergy\Senergy1.for
Item12=C:\senergy\Signatures.txt
Item13=C:\senergy\test_senergy_main.for
Item14=C:\senergy\test_senergy_sub.for
Item15=C:\Users\kenny\AppData\Local\IntPetro41\UserPrograms\Logicom_Launcher_CSharp\UsersCode.cs
Item16=C:\duk6\Duk6\LQ_INT.FOR
Item17=C:\duk6\Duk6\wf_env.for
Item18=C:\duk6\Duk6\wf_func.for
Item19=C:\duk6\Duk6\LQ_FUNC.FOR
Item20=C:\duk6\Duk6\lq_test.for
Item21=C:\wlib\A_ENV.INC
Item22=C:\wlib\a_csv.for
Item23=C:\duk6\IOLIB\Io_func.for
Item24=C:\wlib\W_TEST.FOR
Item25=C:\duk6\Duk6\WF_POPS.FOR
Item26=C:\duk6\IOLIB\IP_Func.for
Item27=C:\duk6\Duk6\duk_6.for
Item28=C:\duk6\Duk6\LQ_MAIN.FOR
Item29=C:\duk6\Duk6\APP_MAIN.FOR
Item30=C:\duk6\IOLIB\IO_INIO.FOR
Item31=C:\duk6\IOLIB\IO_LDIO.FOR
Item32=C:\duk6\IOLIB\IO_MAIN.FOR
Item33=C:\wlib\NLIB.FOR
Item34=C:\duk6\IOLIB\IO_MISC.FOR
Item35=C:\duk6\IOLIB\io_wells.for
Item36=C:\duk6\Duk6\kkk.for
Item37=C:\duk6\IOLIB\io_test.for
Item38=C:\duk6\IOLIB\IO_CHANS.FOR
Item39=C:\duk6\modules\d_type.for
Item40=C:\duk6\Duk6\DUKPET.FOR
Item41=C:\duk6\Duk6\yy_mod.for
Item42=C:\duk6\Duk6\WF_MAIN.FOR
Item43=C:\duk6\Duk6\WF_LOG.FOR
Item44=C:\duk6\Duk6\WF_SPEC.FOR

Edited 1 time(s). Last edit at 2013-03-19 12:49 by KennyT.

Hi

My "save work/desktop" option is also set to "PSPad opened files only" and PSPad never opens the project that was open when I PSPad closed.

Is this issue being worked on as I would like to use projects.

John

It's strange, cause project has bigger priority than files. PSPad should open last used project when you start PSPad only (without file as parameter).